Microcement
Premium microcement coating system for seamless floors, walls, and surfaces. Durable, thin-layer application for residential and commercial interiors. Available in 60+ colors.
Application Visual
Real project appearance
What makes this coating system stand out?
- Seamless, grout-free finish
- Applied as thin as 2-3mm over existing surfaces
- High compressive strength and impact resistance
- Water-resistant when properly sealed
What are the technical specs?
Color & Texture Options
Microcement 鈥?surface variations
More color and finish options available. Request color card.
Application Process
From surface preparation to final protection
Substrate Preparation
Clean and level the surface. For tiles: apply interface agent and filler. For cement: apply waterproof layer. New concrete floors must cure for at least 28 days before application.
Good preparation determines 80% of the final result. Never skip this step.
Primer Application
Roll on 1-2 coats of penetrating primer. This strengthens adhesion between the substrate and the microcement layers.
Use a high-quality acrylic primer for best results on porous surfaces.
Mesh Reinforcement
After primer dries, embed an alkali-resistant fiberglass mesh into a thin base layer. This prevents future cracking, especially on floors and large areas.
Overlap mesh joints by at least 5 cm for continuous reinforcement.
Microcement Application & Sanding
Apply 2-3 coats of microcement with a stainless steel trowel. Sand between each coat after 24 hrs drying. First coats level the surface; the final coat creates the desired fine texture.
Apply each coat thin and evenly. Thick coats increase cracking risk.
Dust Cleaning & Sealer
Vacuum thoroughly after final sanding. Roll on 1-2 coats of sealer/varnish. This protects the microcement and determines the final finish 鈥?matte, satin, or gloss.
Use a microfiber roller for bubble-free sealer application.
Steps may vary depending on substrate conditions, indoor/outdoor location, ambient temperature, and the specific decorative effect desired. This guide is for reference only. Always refer to the full technical datasheet for your specific product.
Sourcing Support
Sample Available
Request a physical sample to evaluate color, texture, and quality before ordering.
OEM Supported
Custom formulation, your branding, your packaging. We adapt to your product line.
Export Packaging Ready
Standard export packaging with proper labeling and documentation for international shipping.
